Tools/Maintenance

A worn chain shifts poorly and wears sprockets at an accelerated rate. Park Tool's Chain-Wear Indicator is a “go-no go” gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement. The updated CC-3.2 is longer, more accurate and features permanent measurement markings.

Park's Chainring Nut Wrench makes chainring bolt installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. And, it's double-ended to fit most slotted-type nuts, including Campagnolo chainring bolt nuts.

Park's Compact Crank Puller is used to remove Shimano Octalink, ISIS Drive and square-taper cranksets. It includes 2 rotating tips (16.3 and 11.3mm) to make the job easy. This is a great tool for your travel and home tool kit.

Disc brake rotors should be regularly checked for wear to ensure safety and performance. The DCA-1 installs onto most digital, dial, or vernier calipers (including the Park Tool DC-1) and features protruding contact points that allow measurement of the center of the braking surface, bypassing the unworn edge to ensure an accurate measurement. The conical end points of the DCA-1 can be used to measure center-to-center distances of bolt holes for calculating bolt circle diameter (BCD) of chainrings and cranks. - Compatible with most standard vernier, dial, and digital caliper designs

12 splines, 22.6mm diameter fits Shimano, Sachs Aris, Sun Race, DNP Epoch, and other 5–10 speed freewheels. The FR-1.3 includes an enlarged thru-hole to accommodate 14mm axles.

This dual-sided brush is specifically designed for cleaning hard-to-reach areas of the bicycle drivetrain. The long, stiff bristles of the GSC-3 are narrow enough to reach between the gears of tightly-spaced modern cassettes, while the slim contoured end is capable of picking grit and grime out of tight spaces such as derailleur pulley wheels.

The HCW-16.3 is a combination 15mm pedal wrench and chain whip. Use for both pedal removal/installation and for cassette removal. Chain whip features improved compatibility with 5-speed to 12-speed mountain and road bike cassettes and freewheels. The HCW-16.3 is 10.75" long (27.3cm).

Park's Home Mechanic Pedal Wrench is great for your home workshop and event tool box. This top-quality 15mm pedal wrench provides the leverage you need to remove stubborn pedals. It's made to last from heat-treated steel, and the handle has a vinyl grip for comfort.

Designed and built to remove and install the lockring that retains front chainrings found on Shimano STEPS e-bike motors. - Fits Shimano STEPS E6100, E7000, E8000 and E9000 e-bike motor systems - For lockrings with 54mm outside diameter and 16 notches - Replacement for Shimano TL-FC39 tool - 36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torque - Constructed of 4140 heat-treated steel and plated for long life

Many chains use a master link that allows the chain to be installed and removed by hand. While master links don't require traditional chain tools, over time, dirt and corrosion can make it difficult to separate them by hand. Park's Master Link Pliers make removing and installing these master links quick and easy. Simply insert the specially sized jaws into the link and squeeze the vinyl-coated handles!

Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.

A must-have tool for any rider or mechanic who services hydraulic brakes. The PS-1 Pad Spreader features a tapered edge designed to drive apart and reset hydraulic bicycle brake pads that may have been accidentally engaged. The head of the PS-1 mimics a section of disc brake rotor, with strong stainless steel construction and a long, vinyl-dipped handle for leverage and comfort. The PS-1 can also be used as a temporary stand-in for the rotor when testing or servicing the hydraulic system, negating the need to repeatedly remove and install the wheel. - Thickness: 1.95 mm - Length: 162 mm (6.4")

Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.

Park’s Professional Cable And Housing Cutter is specifically for use on derailleur and brake cables and housing. It even makes quick work of hard-to-cut shift-cable housing. Its cold-forged, heat-treated-steel handles won't bend and its precision-ground jaws cut perfectly every time. Its dual-density molded grips are specially contoured for superior comfort and control. Plus, there’s a built-in cable-end crimper and a forming hole for reforming housing ends.

These shop-quality L-shaped hex wrenches have a genuine Bondhus balldriver tip on the long arm (excluding the 10mm) for hard-to-reach bolt heads and a straight tip on the short arm for high-torque applications. The HXS-1.2 includes a handy portable tool organizer/holder and it's hinged for easy access. • Includes 1.5, 2, 2.5, 3, 4, 5, 6, 8, and 10 mm sizes • Wrench tips are precision chamfered for a clean, tight fit • Made from industrial-quality Bondhus Protanium high torque steel

Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs

Everyone wears out their Park Tool work stand clamp covers at some point. Find replacement covers for yours here. Each cover is constructed of soft, durable composite rubber. See below to determine which covers fit your Park Tool stand clamp: - 1002: fits 100-3X and 100-5X extreme range clamps - 1185: fits clamps on the repair stands PCS-9, PCS-10, PCS-11, and PCS-12 - 1259: fits 100-4X, 100-6X, 100-7X, and 100-15X clamps - 1960: fits 100-3D, 100-5D, and 100-25D Professional Micro Adjust Repair Stand Clamps - 468B: fits clamps with double cable reliefs, including 100-3C, 100-5C, 100-8C, 100-8Y, and 100-9C clamps - 467B: fits clamps with single cable relief, including PRS-2 through PRS-8 (for older-style clamps, non-current) - 468G: fits PCS-1 and PCS-2 clamps with double cable reliefs (clamp models: 100-1C, 100-1CA, and 100-2C) - 467G: fits PCS-1 and PCS-2 clamps with single cable relief (for older PCS-series stands only; not for current model stands) - 466: Rubber Replacement Clamp Cover Set (fits older clamps with plastic-dipped jaws)

Updated to fit current 12-speed cassettes, this combination chain whip and freewheel / lockring remover wrench is heat treated to prevent bending, flexing and wear and features a long, molded handle in addition to a built in hex shaped driver. - Works on 5- to 12-speed road and mountain bike cassettes and freewheels - 1-inch (25.4mm) box-end wrench fits Park Tool Freewheel / Cassette Lockring Tools - Features hardened pins to keep the chain in place

The 15-inch SWB-15 is a forged steel breaker bar with a 3/8-inch square drive head that pivots 180º. Features a long, knurled handle, which is extremely useful when extra leverage is needed to remove stubborn fasteners.

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

Park's professional-quality, precision-sized spoke wrenches are hardened and chrome plated for long service. Wrenches are vinyl coated in one of four colors indicating the size at a glance. You will find these wrenches in virtually every professional bike shop and every shop mechanic's personal tool stash. Make sure you have the sizes you need in your home toolbox and bike bag.

The DTD-10 is a precision component Torx®-compatible driver machined to exact standards to ensure a perfect fit on compatible component fasteners. The stubby size of the DTD-10 provides extra control during removal and installation of delicate hydraulic brake fittings. Featuring an ergonomic CNC-machined hard-anodized 6061 aluminum handle and a precision T10 tip. - T10 Torx®-compatible wrench - Not intended for high-torque applications - Total length: 3.75" (95mm) - Shaft length: 1.7" (43mm) - Weight: 2.22 oz. (63g)

The DTD-8 is a precision Torx®-compatible driver machined to exact standards to ensure a perfect fit on compatible component fasteners. The stubby size of the DTD-8 provides extra control during removal and installation of delicate hydraulic brake fittings. Featuring an ergonomic CNC-machined hard-anodized 6061 aluminum handle and a precision T8 tip. - T8 Torx®-compatible wrench - Not intended for high-torque applications - Total length: 3.75" (95mm) - Shaft length: 1.7" (43mm) - Weight: 2.22 oz. (63g)

Professional quality T-Handle hex wrench built for speed, efficiency, leverage and a perfect fit. - Carefully selected combination of Chrome Vanadium and S-2 tool steels - Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless - Machined, chamfered tips allow easier insertion into hex fittings - Integrated “Strip-Gripper” twisted hex that makes removal of most bolts with stripped or oversized hexes fast and easy - Sliding T-handle creates increased leverage and multiple access positions

Professional quality T-Handle star-shaped wrench built for speed, efficiency, leverage and a perfect fit. - Carefully selected combination of Chrome Vanadium and S-2 tool steels - Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless - Sliding T-handle creates increased leverage and multiple access positions

The TWB-36 is a crow foot style wrench used with any 3/8-inch drive torque wrench and drive tools with 36mm wrench flats such as Park Tool LRT-2, LRT-3, LRT-4 and BBT-18 to verify components are torqued to the correct specification. Constructed from heat-treated 4130 laser-cut steel and plated for long life.

Three of the most common Torx compatible wrench sizes in our classic 3-way design. The TWS-3 is useful for disc rotor bolts (T25), chainring bolts (T30), and hydraulic brake work (T10). TWS-3 FEATURES - T10, T25 and T30 Torx compatible set - Wrenches made from industrial tool steel, through hardened and tempered for long life

• Updated to fit better in the hand with a more rounded, smoother shape • The precision sized SW-7.2 fits the three most popular spoke nipple sizes on the market • Nickel plated for years of service • Designed for the home mechanic. FIts the following size spoke nipples: • .127" (3.23mm) • .130" (3.30mm) • .136" (3.45mm)

Park's Valve Core Tool is great for tightening, removing and installing Schrader and Presta valve cores (the cores are inside the valve), and also Presta valve extenders that have 5mm wrench flats. It's a handy tool to save a tube when all that's wrong is a broken valve, and it also lets you remove valves to easily insert sealant.

- Muc-Off's 3 most popular brushes in an handy pack - Claw brush ideal for chain, cassette and sprocket - Detailing brush ideal for tight areas such as suspension mounts or fork crowns - Soft washing brush ideal for your bike frame and wheels