Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Packs/Racks/Baskets

$39.00
A verstile basket that can manage anything from books to groceries. - Extended handlebar clamps allow greater clearance for shift and brake cables - Legs extend from approx. 14" to 22" when mounted to the axle or eyelets - Fits 7/8" to 31.8mm handlebars - Made in USA - Dimensions: 14 x 9 x 9"
$25.00 - $36.99
The 157's little brother, this basket is just as functional. Some people don't need to cart around large pizzas or multiple full size grocery bags, so this basket is for the more streamlined commuters and delivery pros. Sturdy one-piece legs offer all the support you'll need when hauling heavier loads. - Fits most bikes - Adjustable legs mount to front axle for a secure fit - 15" x 10" x 5" deep - Easy to install
$23.25 - $38.00
- Made in U.S.A. (Maysville, KY) - Shallow baskets carry notebooks, boxes or other articles that lie flat - Dimensions: 15 x 10 x 4.75 inches; the basket tapers to 13 x 8 inches at the bottom - Extended handlebar clamps fit 7/8" and 1" diameter handlebars, and 1 3/4" apart to offer clearance for shift and brake cables - Baskets have 2-piece legs which extend from 14 inches to 22 inches and mount to either the axle or fork eyelets on bikes with quick release front hubs - 1372 has a Zinc plated finish; 1372GB has a Black Powder Coat Finish - Complete basket with fittings weighs 2.2 lbs.
$35.00 - $40.99
The 157's little brother, this basket is just as functional. Some people don't need to cart around large pizzas or multiple full-size grocery bags, so this basket is for the more streamlined commuters and delivery pros. Sturdy one-piece legs offer all the support you'll need when hauling heavier loads. This rack cannot be used on bicycles with front suspension systems or springer forks. - Standard front bicycle basket fits most bikes - Adjustable legs mount to front axle for a secure fit - 18" x 13" x 6" deep - UV Weather-resistant bike basket - Available with wooden bottom to better hold your cargo
$34.99
- A unique blend of functionality and style - Offers the convenience of carrying your gear within easy reach of the handlebar - The only basket in Wald's lineup that offers lowered front and side wires for just a touch of unique appeal - Hardware included - UV and weather resistant - 14" x 9" x 7"
$71.50
- Made in U.S.A. (Maysville, KY) - Dimensions: 20.5 x 13 inches - Extended handlebar clamps are 2" apart, allow greater clearance for shift and brake cables, and fit 7/8", 1", and 1 1/4" diameter handlebars - Legs extend from 13 3/4" to 21 1/4" and have two mounting holes for mounting to either the axle or fork eyelets for bikes with quick release front hubs - Powder Coat Finish - Complete rack with fittings weighs 6.0 lbs.
$25.95
Don't overstuff your jersey pockets. Simplify your load by putting your essentials in Topeak's Aero Wedge Pack. It straps neatly beneath your seat and is constructed of durable 1200-denier, Teflon-coated polyester with reflective strips and a taillight mount for nighttime safety.
$22.95
Don't overstuff your jersey pockets. Simplify your load by putting your essentials in Topeak's Aero Wedge Pack. It straps neatly beneath your seat and is constructed of durable 1200-denier, Teflon-coated polyester with reflective strips and a taillight mount for nighttime safety.
$49.95
Topeak's tubular aluminum rack allows you to easily mount your BabySeat II or your Topeak MTX TrunkBags (both sold separately) to your bicycle. So go ahead and bring your favorite little passenger or gear along for the ride.
$114.95
- Adventure ready saddle mounted removable drybag and holster system - Includes waterproof carry bag with air release valve to keep gear dry and compact - Bag easily slides in and out of holster without having to remove from bicycle - 15L measures 19.7
$69.95
A clever handlebar bag that converts to a waist pack. Great for cameras, cell phones and other essentials you want close at hand. Rain cover included. - Divided main compartment, Two side zip pockets - Material: 1800 denier nylon - Max Load: 5kg / 11lb - Fully padded - Waist Belt, Carry handle, Rain cover, Yellow lining - QuickClick Handlebar Mount (Fixer 8) - Fits 25.4, 28.6 & 31.8mm handlebars - Size: 22 x 18 x 13cm / 8.7" x 7.1" x 5.1" - Weight: 334g / 11.78oz
$24.95
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.
$32.95
Topeak's Tri DryBag keeps your gear dry no matter the weather. Composed of water-resistant fabric, this top tube pack sports a flap that folds over the opening and prevents water penetration. It attaches via hook-and-loop straps and you'll have plenty of room for carrying your phone, wallet, tools and energy bars in this streamlined bag.
$28.00
Keep your beverage cold or hot with the insulated ADV stem bag. May be mounted on the left or right side, and fastened with adjustable straps on the handlebar and stem. Drawstring enclosure, 1L compartment insulated to keep contents cool or warm. - May be mounted on either side (Left and right) of the stem - Insulated for warm or cool items - Opens/closes by drawstring - PU coated splash resistant 600 denier Nylon - Fits up to 160mm head tube circumference - Capacity: 61 cu in (1L) - Weight: 100g
$27.00
Perfect for carrying essentials, the 0.5L capacity ADV top tube bag fastens to the top tube and steering column with adjustable buckle straps. Waterproof zippered top opening for easy access to the storage compartment. - Fastens to steerer column and top tube - Opens/closes with a zipper on top - PU coated splash resistant 600 denier Nylon - Water-resistant polyurethane coating on zipper - Fits up to 160mm steerer column/top tube circumference - Capacity: 30.5 cu in (.5L) - Dimension: 18cm (L) x 4cm (W) x 8.5cm (H) - Weight: 100g
$136.00
The Kestrel Handlebar Bag is an ideal size for adventurous day trips. It's easy to attach, features interior and exterior zipper pockets and is MOLLE compatible. The Kestrel is purpose-built for handlebar functionality and is elevated by its modularity: Add a Sidekick Stem Pouch or Rando Pocket onto the back of the bag for even more carrying capacity. The Kestrel Handlebar Bag is made out of Challenge ECOPAK 100% recycled polyester and contains roughly 5 plastic bottles rescued from ocean beaches. Features: - Fully lined with 400D Nylon Packcloth - Exterior Coverlight™ lash tabs for mounting to handlebars - Exterior bottom Coverlight™ daisy chain for lashing a small pump or fly rod - YKK water resist zippers - Exterior and interior pockets for organization or small items - Simple shock cord & cord lock attachment for head tube - Lash points for bedroll straps on top and bottom of rear panel - Modular integration with the Sidekick Stem Pouch and Rando Pocket - Made in Surabaya, Indonesia out of recycled materials. Dimensions: - Measurements: 10"w x 5"h x 3"d - Capacity: 2L - Weight: 6 oz
$63.00
The small-but-mighty Moxie Top Tube Bag is sure to be a permanent accessory on your trusty, two-wheeled steeds where it tucks nicely into the nooks and crannies of your bike. This secure bicycle top tube bag puts essentials like snacks, gloves or your phone at arm's reach and just a zipper pull away. A dream cockpit set-up combines the Moxie Top Tube Bag with Sidekick Stem Bag or the Gibby Stem Bag. The Moxie Top Tube Bag is made out of recycled polyester and contains roughly 2 plastic bottles rescued from polluted rivers. Coming in at around half a liter of volume, the Moxie Top Tube Bag is the perfect home for smaller gear and snacks protected by a water-resistant zipper for ease of access and tough ECOPAK™ fabric. We built in added protection for delicate cargo with side-wall stiffeners and a layer of padding. The daisy chain webbing attachment system paired with One Wrap velcro straps (included in the purchase) allows for flexible attachment. Features: - Challenge Sailcloth recycled polyester bag cloth rip stop (450D) - Nylon mesh stiffener - Closed cell foam padding - YKK water-resistant zipper - Comes with 3 One Wrap Velcro attachment straps and flexible mounting points - Made in Surabaya, Indonesia out of recycled materials. Dimensions: - Measurements: 4.125" x 8.5" x 2" - Capacity: 0.6 Liters - Weight: 2.75 oz
$145.00
Surly Racks are well-thought-out, durable, expedition-worthy racks that work with most panniers. While their racks aren't limited solely to heavy duty touring, that is what they were designed for. When you're out on the road, the best option is to never ever have anything ever go wrong ever. Right? That's never a guarantee though; so having something that you can repair if it does break can be pretty clutch. Thus, the main bodies of Surly's front and rear racks are made from tubular CroMoly steel with stainless hardware. This means you can probably find someone out there that can torch it back into one piece in the rare instance things go south. The Front Rack is height adjustable and provides either a low or high pannier mounting position, which can be handy depending on terrain. When the ground gets rough, keep your gear high and dry. When the path is smooth and easy, you can load things low and keep everything balanced and stable, with the platform above the wheel providing yet more space for more stuff. It's worth mentioning they've redesigned the Front Rack hardware to be simpler to attach and more compatible with things like disc calipers and fenders. Surly also made attachment plates specifically for their Uni-Crown forks for yet more fork compatibility. This simpler design has fewer moving parts and costs less to manufacture; ergo, costs less for you to purchase. Surly's front rack WILL work with disc brakes on the Troll, Ogre, and Disc Trucker frames. It may take a bit of work to get clearance around the front caliper since the many different calipers out there are many different shapes. The new attachment plates will limit any DIY ingenuity you might need, but if you need to throw a washer or three behind the lower left bolt where the plate attaches to the fork dropout, that's not a big deal. As part of Surly's ongoing effort to make this planet last a little longer, they recently started shipping their racks with a small, reusable Surly Tool Bag that houses the rack struts and hardware. This switch helps eliminate the use of some polybags, thereby minimizing excess waste. Plus, you get a free tool bag out of the deal. Surly Front Rack will haul up to 32kg (70 lb) of well-secured, well-balanced gear over roadways and maintained off-road trails. Front Rack specifications: - Tubing diameter: 10mm - Platform dimensions: 230 x 170mm - Weight: 1382g
$35.00
Specifically designed for MTB, gravel, and plus tire riders, the Ranger Large combines all the features of the standard Ranger pack with even MORE capacity and a longer strap to keep it all nice and tight! Tools, emergency gear, and more are kept dry inside the waterproof ballistic nylon shell and organized securely in tight interior pockets, eliminating the annoying rattle that plagues the traditional saddle pack. The narrow profile design tucks the Ranger Large tightly up and out of the way—free and clear of your legs (AND most dropper posts*!)—and a reflective logo imprint on the strap provides added visibility in low-light conditions. *Rowdy Dropper Lovers NOTE: While the Ranger Large is the most compact and low-profile saddle pack on the market and has been tested on a variety of full-suspension bikes with dropper posts, each and every setup is different. Saddle type and position, dropper length, sag setup, etc… all come into play and it is the owner’s responsibility to ensure that there is enough clearance between the pack and your back tire when the dropper is down and suspension is fully compressed. BEST FOR: MTB and gravel Suggested load-out: (1) 26, 27.5, 29, 27.5+ or 29+ tube, (2) 16g or 20g CO2 Cartridges + Inflator, (2) Tire Levers, (1) Compact Multi-Tool. IS THE RANGER LARGE THE RIGHT PACK FOR ME? If you roll standard or plus-size mountain bike tires then YES, but there’s a Ranger for any riding style! Looking for a bit less capacity for road or gravel check out the Ranger Medium. If you’re a diehard minimalist, only wanting to carry the bare essentials for an ultra-light road or tubeless setup, you’ll want the Ranger Small. - Constructed from waterproof nylon fabric and features a full-cover waterproof sleeve - Connects only to the saddle rails, making it ideal for bikes with dropper seatposts - Available in small, medium, and large sizes - Small model is capable of carrying 1 x 700c 23-32 sized tube, 2 x CO2 cartridges, 1 x tire lever, and 1 x inflator head - Medium model is capable of carrying 1 x 700c 25-32+ tube or 2 x 700c 18-28 tubes, 2 x CO2 cartridges, 2 x tire levers, 1 x inflator head, and 1 x compact multi-tool - Large model is capable of carrying 1 x MTB tube, 2 x CO2 cartridges, 1 x inflator head, 2 x tire levers, and 1 x compact multi-tool
$35.00
The ultimate in versatility—volume for road riding essentials as well as long-haul gravel rides—the Speedsleev Ranger redefines the saddle pack. Tools, emergency gear, and more are kept dry inside the waterproof ballistic nylon shell and organized securely in tight interior pockets, eliminating the annoying rattle that plagues the traditional saddle pack. The narrow profile design tucks the Ranger tightly up and out of the way—free and clear of your legs (AND most dropper posts!)—and a reflective logo imprint on the strap provides added visibility in low-light conditions. SUGGESTED LOAD-OUT FOR: Road / Gravel (2) 700c 18-28 road or (1) 700c 25-32+ CX/gravel tube, (2) 16g or 20g CO2 Cartridges + Inflator, (2) Tire Levers, (1) Compact Multi-Tool. IS THE RANGER THE RIGHT PACK FOR ME? Likely YES, but there’s a Ranger for any riding style! If you’re a diehard minimalist, only wanting to carry the bare essentials for an ultra-light road or tubeless setup, check out the Ranger Small. For mountain bike and high-volume tire riders, you’ll need the Ranger Large. PLUS, the Ranger always has room to spare for a credit card, key, driver’s license, and cash for the post-ride celebration! - Constructed from waterproof nylon fabric and features a full-cover waterproof sleeve - Connects only to the saddle rails, making it ideal for bikes with dropper seatpost - Available in small, medium, and large sizes - Medium model is capable of carrying 1 x 700c 25-32+ tube or 2 x 700c 18-28 tubes, 2 x CO2 cartridges, 2 x tire levers, 1 x inflator head, and 1 x compact multi-tool
$35.00
The ultimate in versatility—volume for road riding essentials as well as long-haul gravel rides—the Speedsleev Ranger redefines the saddle pack. Tools, emergency gear, and more are kept dry inside the waterproof ballistic nylon shell and organized securely in tight interior pockets, eliminating the annoying rattle that plagues the traditional saddle pack. The narrow profile design tucks the Ranger tightly up and out of the way—free and clear of your legs (AND most dropper posts!)—and a reflective logo imprint on the strap provides added visibility in low-light conditions. SUGGESTED LOAD-OUT FOR: Road / Gravel (2) 700c 18-28 road or (1) 700c 25-32+ CX/gravel tube, (2) 16g or 20g CO2 Cartridges + Inflator, (2) Tire Levers, (1) Compact Multi-Tool. IS THE RANGER THE RIGHT PACK FOR ME? Likely YES, but there’s a Ranger for any riding style! If you’re a diehard minimalist, only wanting to carry the bare essentials for an ultra-light road or tubeless setup, check out the Ranger Small. For mountain bike and high-volume tire riders, you’ll need the Ranger Large. PLUS, the Ranger always has room to spare for a credit card, key, driver’s license, and cash for the post-ride celebration! - Constructed from waterproof nylon fabric and features a full-cover waterproof sleeve - Connects only to the saddle rails, making it ideal for bikes with dropper seatpost - Available in small, medium, and large sizes - Small model is capable of carrying 1 x 700c 23-32 sized tube, 2 x CO2 cartridges, 1 x tire lever, and 1 x inflator head - Medium model is capable of carrying 1 x 700c 25-32+ tube or 2 x 700c 18-28 tubes, 2 x CO2 cartridges, 2 x tire levers, 1 x inflator head, and 1 x compact multi-tool - Large model is capable of carrying 1 x MTB tube, 2 x CO2 cartridges, 1 x inflator head, 2 x tire levers, and 1 x compact multi-tool
$20.00
- Versatile as you can make it, From holding tubes, Gels or energy bars to multi tools and lighting system batteries, The possibility's are endless - Small: Fits seatposts and smaller tube bikes - Large: Fits narrow top tube, Stem and lefty fork applications
$99.99
These rear rack-mounted adapters provide simple and secure mounting points for panniers like the Coolcave. The low mounting position opens the top rack platform for other accessories like the Rack Customization Kit or MIK adapter. *Third-party panniers not tested for guaranteed compatibility - Designed for frictionless compatibility with the Globe Haul ST and up to 2 pairs on Haul LT* - *Not compatible with Globe Pegs due to shared mounting location. - Accepts most standard bicycle panniers, such as the Specialized Coolcave. - Includes two pannier adapters (one for each side of the rack) and all required hardware. - 8kg (18lb) load capacity per side. - Additional tools required for rear installation (not included).
$90.00
- 15kg carrying capacity. - Folding design allows it to fold down to size of a pizza box. - Lightweight aluminum, 13mm rails. - Can carry any side pannier with hooks that fit 13mm rails or larger. - Additional platform on top allows for an extra bag.
$70.00
Built for those who simplify and go, the Cave Tote is our minimalist accessory for your Coolcave. A large main pocket lets you fill the tote with items big and small, perfect for trips to the supermarket, picnics, and everything in between. The tote lifts out of the Coolcave to bring with you into the store, gym, or wherever. - 20L capacity. - Double handles with adjustable shoulder strap. - Small interior zip pocket. - Expandable interior cinch closure. - Compatible with Coolcave pannier. - Large Specialized/Fjällräven logo print.
$45.00
Easy-access handlebar holder for a bottle, snacks, or other small items. Helps keep hydration and spirits up on warm, high-intensity days in the saddle. A cinch-and-release snowlock closure makes for easy handling and keeps contents in place on bumpy rides. Made from durable Vinylon with an all-around foam padding for structure and ease of use. Attaches to the handlebar post with up to three Velcro straps. Can also be attached to the webbing on the front of the Specialized/Fjällräven Handlebar Bag. Part of the Specialized/Fjällräven series for urban rides and bikepacking adventures. - Semi-soft design in Vinylon F with foam padding and recycled nylon lining. - Single-hand operated cinch lock. - Front pocket in mesh fabric for energy bars or snack wrappers. - Eyelet in the base drains out water. - Fits bottles up to 75 mm in diameter. - Material- Vinylon F (100% vinylal)
$55.00
Two-way zippered top tube bag with a large opening for easy access to biking essentials. Semi-soft design with a reinforced base that attaches with Velcro straps or screws to the top of the frame. The pack is made from durable Vinylon with a recycled nylon lining and foam-padded sides. Inside mesh pockets keep track of your smaller items. Seams are not taped, but the lining fabric is waterproof. Part of the Specialized/Fjällräven series for urban rides and bikepacking adventures. - Weather-resistant design in Vinylon F with recycled nylon lining. - Sturdy attachment system using Velcro straps or screws. - Weather-resistant cable opening on side facing forward. - Foam-padded side panels and plastic stabilizer in the base. - Dimensions- 25 x 9 x 5 cm - Material- Vinylon F (100% vinylal)
$120.00
Take your ride up a notch with the Front Rack and Adventure Plate combo. These Specialized e-bike accessories give you an extra carrying platform to carry up to 10kg on the front end of your Turbo Vado, Como, or Tero. The front rack system for the bike was designed thoughtfully for elegant integration at the front of your bike, and it features meaningful compatibility for carrying what you want, how you want to. - Compatible with Turbo Vado, Como, and Tero. - Mounts to compatible bikes via the headtube interface. - Optional MIK compatibility when the plate is removed. - Seamless integration of front light mount. - Max. Load 10kg. - Retailer installation is recommended.
$32.50
The Serfas Handlebar Bag is a convenient bar storage solution for those all day rides around town. Free up your pants pockets and stow items in the external mesh pocket or just dump everyday items (water bottle, phone, wallet, keys, etc.) into the main cinch pocket. It's built of durable materials and construction, secures to bike using a universal-fit strap mounting system, and has a drain hole on the bottom. - Bottom fork strap is removable (recommended for bikes w/ suspension front fork) - Bottom side frame strap is removable (recommended for bikes w/ rigid front fork) - Can be installed on left or right side of stem - Universal-Fit Hook & Loop Mounting Straps - Size: 3.5" Diameter / 6.5" Height - Capacity: 62.5 Cubic Inches
$90.00
Serfas Pannier Bags are stylish, high quality, and the most affordable way to add a ton of storage to your ride. Perfect for commuting to work, busy students biking to class, or just a lazy Sunday aimlessly riding around town stopping in at some of your favorite local spots. It's made of water-resistant 300D Polyester material, has a carrying capacity of 36L (18L per side), and is deck ready for mounting to a rear rack. - Quick Access Flip-Top Closure With Single Buckle (x2) - Webbed Nylon Top Carry Loop (x2) - Durable Reinforced Bag Edges and Stiffened Wheel-Facing Bag Panel - Convenient Left and Right Side Safety Light Attachment Loop - Silver Reflective Safety Stripes (Rear-Facing When Mounted To Bike), Reflective Serfas Logo - External Zippered Flap Pocket With Protected Zipper (x2) - Dimensions: 15" (Top Width) x 15.25" (Height) x 12.5" (Bottom Width) - 6" Wide Connecting Center Attachment Panel - Weight: 1074g / 37.9oz
Page 1 of 3 Next page